20yd High Back Lugger
High Back Lugger
20yd High Back Lugger

High Back

STANDARD CONSTRUCTION

  • 3/16” Walls, ¼” Floors & Dump end
  • Corners wrapped with ¼” thick steel
  • 4” Channel around perimeter of container
  • 3” Channel floor stiffeners
  • 6” Channel at lift pins
  • ⅜” Lift pin support plates
  • 3/16” Side bump plates below lift pins
  • 1½” Dia. drain with plug
  • Industrial enamel primer & paint
  • Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals

OPTIONS INCLUDE: Dump hooks, Butterfly drain valves, Rear doors, Fully Gusseted floor & Dump Ends, & Covers

STANDARD HIGH BACK LOW PROFILE SLUDGE
6YD 50x68x120
8YD 54x68x141 54x68x141 42x68x156
10YD 60x68x151.5 72x68x145 60x68x151.5 60x68x153
12YD 72x68x151 72x68x151 39x68x192 77x68x152.5
14YD 84x68x168.5 78x68x169.5 75x68x171
15YD 78x68x168.5 70x68x182.5 65x68x93.5 84x68x173
16YD 84x68x168.5 84x68x169.5 65x68x195 75x68x195
18YD 84x68x186.5

68″W Does not include Pins & Ears