Receivers
STANDARD CONSTRUCTION
-
- 3⁄16” Floors, length determined by capacity
- 12 Gauge sides, front, door & roof
- Tapered construction for easier dumping
- 3”x5”x3⁄16” Structural tubing used for back channel and roof supports
- 10 Gauge formed, 2 bend, 5¾”W side channels are spaced 30” on center for side & roof stiffeners
- Industrial enamel primer & paint
- Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals Understructure
- 3”H Structural channel 18” on center, with full 3”H structural channel apron
- Drain holes (through floor) under each side channel
- 13⁄8” Thick solid bullnose inserted 2” into rails into 2”x6”x3⁄16” rails
- Rear Rollers – 8” Dia.x10”W with grease zerks & ½” thick wheel plate Doors
- Constructed with 12 gauge door sheet and frames of 3”x4”x3⁄16” tubing uprights & horizontal cross-members (No formed channel)
- Extra heavy-duty door hinges with grease zerks. Each hinge assembly covers 1 linear foot of door surface
- Guide support latch side of door
- Door safety chain uses a heavy-duty quick snap with Ratchet latch system
- Sealed Doors & Sealed Charge Opening doors available upon request
- Pinning Tunnels & Bars are available upon request Hook Styles
- Cable-1¾” Cable hook with ¾” thick plate & 4” Dia.x6”W Front Rollers with grease zerks & ½” thick support
- Hook-2”x6”x3⁄16” A-frame with 2½” Dia. pin/bar & 5⁄8” thick hook plates
- Deadlift