Lift pockets on 4-yard & down are: 10-gauge x 8”H x 24” Long. Pockets on 6-yard & up are:
3/16” x 8”H x 30” Long. All are fully welded, including leads, gussets & dirt shedders
Fork deflectors at back of pockets
2”x4” Formed 10-gauge bottom channel runs perpendicular to container. Asphalt surfaces are less
susceptible to damage & container will not crush in at bottom. Floor is suspended off ground adding
years of services.
Walls are laminated at bottom channel, this keeps container walls from buckling at it’s weakest point
½” Zinc plated steel lid rods with a nylock nut on one end
¾” Threaded drain plugs
Steel serial # tag welded on all boxes
All containers come with pickup points for booming containers on site
Industrial enamel primer & paint supplied by Sheboygan Paint Co.
Polyolefin casters with grease-able roller bearings used on ½ to 3-yard containers
Containers are delivered completely assembled and ready for use, including all Decals & D.O.T. Reflective Tape (Including Customer supplied Decals)